Industrial timber supply for professional construction teams
A reliable timber manufacturing partner for general contractors.
ERGIO supplies production-engineered timber kits, structural components and coordinated material packages for contractors delivering large-scale, serial and technically complex projects across Europe.
B2B projectsApproved documentationPhased supplyEuropean delivery
A specialist package inside your construction contract
Keep control of the project while ERGIO controls the timber scope.
The general contractor remains at the centre of programme, design coordination, statutory compliance, site management and client communication. ERGIO operates as the industrial timber specialist responsible for converting approved information into coordinated products that can be manufactured, delivered and assembled predictably.
01
One accountable timber supply interface
Coordinate walls, floors, roofs, beams, connectors, selected envelope materials and logistics through a defined ERGIO package.
02
Documentation designed for production
Every component and machining operation is detailed against the approved architectural and structural information.
03
Support beyond the factory gate
ERGIO remains involved until the contracted timber scope has been completed on site.
Contractor-led project. ERGIO-controlled timber package.
Where ERGIO fits
A clear interface between design, procurement, factory and site.
ERGIO does not replace the project architect, structural engineer or general contractor. It connects their approved decisions to industrial timber production and supports the controlled execution of the agreed package.
Commercial objectives, approvals, programme and investment decisions.
Architectural concept, layouts, details and visual requirements.
Calculations, structural design, loads, connections and engineering responsibility.
From approved information to coordinated factory output.
ERGIO audits the information for production, prepares acceptance drawings, details every piece, releases machine data, manufactures the agreed kit, verifies package completeness and coordinates delivery or assembly support.
- Production engineering
- Value engineering proposals
- Timber systems and components
- Selected envelope materials
- Quality and traceability
- Sequenced logistics
- Assembly documentation
- Site support
Programme, procurement, design coordination, interfaces, site resources and overall delivery.
Erection, temporary stability, lifting, safety and site execution according to the agreed model.
MEP, façade, waterproofing, fire, acoustics and other disciplines outside the ERGIO timber scope.
Procurement packages
Procure exactly the timber scope your project needs.
The package can start with machined structural components or extend to a coordinated building-envelope supply. The final inclusions, exclusions, interfaces and responsibilities are confirmed in the quotation and contract.
Structure-first procurement
Production-ready timber structure.
A coordinated package for contractors who manage insulation, membranes, façades, joinery and downstream trades independently.
- Production engineering and acceptance drawings
- Timber Frame, Post & Beam, Log House or combined structure
- Wall, floor and roof elements where specified
- Project-specific beams, columns and secondary members
- Custom metal connectors and timber fixings
- Piece identification and package references
- Assembly documentation
- Transport or assembly support as an option
Expanded factory scope
Structure plus selected envelope materials.
Reduce procurement interfaces by adding the materials that ERGIO can coordinate with the prefabricated timber system.
- Complete structural timber package
- Thermal insulation according to the agreed build-up
- Air and wind-control membranes
- Structural and lining boards
- Selected internal or external cladding
- Fixings, tapes and system accessories
- Windows and joinery where commercially agreed
- Packages organised by building and assembly stage
Contractor-focused package
A broader coordinated supply for fewer interfaces.
Suitable for large developments and programmes where the contractor wants ERGIO to coordinate a greater proportion of the timber and envelope material package.
- Custom scope built around the project specification
- Multiple timber systems in one coordinated model
- Higher material content per unit
- Phased procurement and manufacturing releases
- Transport planning by building or construction phase
- Assembly by ERGIO, a local partner or the contractor
- Technical support through completion of the contracted scope
- Commercial milestones aligned with the programme
Specialist and recurring supply
Machined elements and repeat orders.
For contractors and timber specialists who need precise components rather than a complete building package.
- Project-specific structural members
- Machined or unmachined supply
- CNC and robotic processing from approved files
- Rafters, purlins, trusses and custom pieces
- Metal connectors manufactured to order
- Marking, labelling and bundled delivery
- Serial components for repeatable projects
- Framework for recurring procurement programmes
Systems and components
One manufacturing partner across multiple timber scopes.
ERGIO can manufacture a complete system or coordinate several timber solutions inside one contractor-led package, with consistent production engineering, identification and logistics.
01Prefabricated elements
Timber Frame Kits
Walls, floors and roofs prepared for rapid erection, repeatability and configurable envelope build-ups.
Explore Timber Frame ↗
02Large spans and visible structure
Post & Beam Kits
Beams, columns, secondary members, custom connections and assembly-ready structural packages.
Explore Post & Beam ↗
03Solid timber construction
Log House System
Precision-machined solid or laminated timber wall systems for professional residential and hospitality projects.
Explore Log House ↗Combined scopes
Where a project mixes systems, ERGIO can coordinate the production information and delivery package through one manufacturing interface.
Information exchange
The quality of the factory output starts with controlled project information.
ERGIO can often begin from architectural drawings, but a detailed quotation and production release require clear, approved information. Structural calculations and engineering responsibility remain with the structural engineer appointed by the partner.
Review Production Engineering ↗Approved project inputs.
The final list depends on the system, market, contract and stage of procurement.
- Architectural drawings and coordinated dimensions
- Structural design and calculations
- IFC, DWG, Cadwork or other 3D CAD files
- Wall, floor and roof specifications
- Fire, acoustic, thermal and durability requirements
- Openings, joinery and interface information
- Construction programme and release sequence
- Site access, lifting and assembly constraints
Production and delivery information.
Issued in stages for review, approval, manufacturing and site use.
- Technical audit and production observations
- Commercial calculation and scope definition
- Acceptance drawings and coordinated model
- Piece-level production detailing
- Machining data and material lists
- Component and package identification
- Assembly references and dispatch documents
- Revision-controlled factory release
From enquiry to installation
A controlled sequence, with approvals before irreversible work.
Indicative periods begin after complete information is received and are confirmed against project complexity, revision volume, procurement requirements and factory availability.
Project submission
Company, drawings, structural information, quantities, target market and programme.
Technical review
Production feasibility, scope, interfaces, assumptions and missing information are identified.
Quotation
Indicatively around 14 days for analysis and calculation when documentation is sufficiently complete.
Commercial alignment
Price, package content, responsibilities, milestones and contractual conditions are agreed.
Acceptance drawing
The first coordinated drawing or model is typically prepared in approximately seven days.
Revisions and approval
Consolidated contractor comments are incorporated; a normal revision cycle is approximately four days.
Production detailing
Every component, connection and machining operation is defined in a controlled model.
Manufacture and delivery
Production, quality checks, sequenced packing, transport and contracted assembly support.
Contractor risk reduction
Industrial control where site uncertainty is most expensive.
The value of prefabrication is not only speed. It is the ability to coordinate decisions before production, reproduce approved solutions and deliver identified components in a planned sequence.
Explore Quality & Traceability ↗Approved before production
Acceptance drawings and revision control reduce the risk of obsolete or contradictory information reaching the factory.
Repeatable geometry
Digital models, MobiOne and Hundegger support consistent components across units and phases.
Defined inclusions
The quotation identifies materials, services, interfaces and exclusions before order confirmation.
Checked before dispatch
Components, connectors and packages are verified against controlled lists and release information.
Packed for construction
Loads can be organised by building, unit, level, elevation, roof zone or agreed assembly phase.
Supported through the timber scope
Documented issues are investigated and, where ERGIO is responsible, resolved as quickly as practical under the contract.
Responsibility matrix
Clear boundaries prevent gaps, duplication and assumptions.
The matrix is project-specific and must be agreed before production. ERGIO does not provide architectural design from zero, structural calculations, MEP installations or complete finishes unless a specific material or service is expressly included.
Leads the overall project.
Coordinates the employer, consultants, programme, procurement and construction site.
- Contract and overall programme
- Design coordination and approvals
- Permits and market compliance
- Foundations and project interfaces
- Site access, crane and storage
- Safety, temporary works and downstream trades
Own the approved design.
Provide the information and professional decisions on which ERGIO production engineering is based.
- Architecture and coordinated geometry
- Structural scheme and calculations
- Loads and engineering responsibility
- Fire, acoustic and thermal requirements
- Review of value-engineering proposals
- Approval of acceptance information
Controls the contracted timber scope.
Transforms the approved design into manufactured, identified and deliverable timber packages.
- Technical review and quotation
- Acceptance and production detailing
- Timber systems and components
- Quality and package completeness
- Transport coordination where included
- Assembly or technical assistance as contracted
Serial and phased programmes
Align manufacturing releases with the construction programme.
For neighbourhoods, hospitality programmes and repeated buildings, ERGIO can structure the work around agreed batches rather than treating every unit as an isolated order.
Programme logicOne validated base.
Controlled releases.
Controlled releases.
ApproveProduceDeliverAssemble
Validate the first configuration
Resolve the representative unit, interfaces, material package and production logic.
Control permitted variations
Separate repeatable components from options, mirrored layouts and market-specific build-ups.
Release by phase
Match procurement, acceptance, production and transport to foundations and site readiness.
Reserve capacity
Confirm forecast quantities and delivery windows early enough to plan materials and factory loading.
Assembly options
Choose the site model that matches your team, market and programme.
Final availability and responsibility depend on the destination, project size, schedule, site conditions and contracted scope.
Your team erects the kit.
Suitable where the general contractor has an experienced timber team or appointed specialist subcontractor.
- Assembly drawings and package references
- Remote support by phone or video
- Clarification of ERGIO-supplied components
- On-site technical assistance can be added
Regional expertise, coordinated supply.
A local timber contractor can erect the kit where labour, language, regulation or mobilisation favour a regional team.
- Scope handover before mobilisation
- Coordination of interfaces and missing information
- Local site resources and compliance
- ERGIO support for the contracted timber scope
Direct installation where available.
ERGIO can provide assembly in international markets subject to programme, team availability and project conditions.
- Defined commercial erection scope
- Site-readiness confirmation before mobilisation
- Responsibility for safety and temporary stability allocated by contract
- Support through completion of the contracted works
Relevant project experience
From controlled factory output to coordinated site execution.
Client names may remain confidential. Project evidence can still demonstrate country, system, scale, ERGIO scope, production sequence and construction result.
View all projects ↗
De Lier
A professional timber project illustrating coordination between structural components, manufacturing and site execution.
View case study ↗
Dutch Timber–Steel Hybrid Residence
A nearly completed house showing how timber walls, steel support, large openings and envelope interfaces can be coordinated before production for predictable site assembly.
View case study ↗
Dutch Rapid-Assembly Timber Residence
A Dutch residential project showing how complete prefabricated wall systems reduce loose site operations and help a structure of around 100 m² assemble in as little as two days, depending on complexity and conditions.
View case study ↗Contractor FAQ
Questions procurement and project teams ask before appointing ERGIO.
Final answers depend on the approved design, market, material package, delivery conditions and contract.
At what stage should a general contractor contact ERGIO?+
Ideally when architectural documentation is developed enough to quantify the building and the structural concept is available. Early contact supports feasibility and value engineering, but a detailed quotation requires controlled drawings, specifications and structural information.
Does ERGIO perform structural calculations?+
No. The structural design and calculations must be provided and assumed by the partner's appointed structural engineer. ERGIO adapts the approved information for production, models each component and defines machining and assembly information.
Can ERGIO quote from architectural drawings only?+
In many cases ERGIO can prepare a preliminary estimate from architectural information and a simplified production study. Assumptions must be identified, and final pricing requires the structural and technical information relevant to the package.
What is the minimum suitable project size?+
For complete kits, projects generally start around 100 m², with a strategic focus on larger, serial and multi-unit developments. Smaller enquiries may be suitable for structural timber, machining or repeat supply, depending on order value and technical scope.
Can the contractor procure only the timber structure?+
Yes. ERGIO can supply a structural package, a package with selected envelope materials, a broader coordinated kit or project-specific machined elements. The final scope is configured for each project.
Can ERGIO deliver in phases?+
Yes. Projects can be released, produced, packed and delivered by building, unit, level or agreed construction phase, provided the programme and approvals are coordinated early enough.
Who installs the timber kit?+
The kit can be installed by the contractor's team, a local specialist partner or ERGIO, depending on the market, programme, availability and agreed contract. Remote and on-site support can also be provided.
What happens if a component is missing or incorrect?+
The issue should be documented against the package and piece reference. ERGIO investigates the source and, when the issue falls within its responsibility, organises the corrective solution as quickly as practical under the contractual terms.
Does ERGIO supply MEP systems or complete finishes?+
No. ERGIO does not normally provide heating, plumbing, electrical systems or complete finished buildings. Selected boards, membranes, insulation, cladding and joinery may be included when expressly agreed in the package.
Professional contractor enquiry
Send the project documentation, scope and target programme.
ERGIO will review the construction system, available information, material package, required quantities, delivery market, assembly model and commercial timetable before proposing the next steps.
B2B collaboration
Bring ERGIO into the project team.
Best suited to professional projects with developed documentation and a clear procurement or production requirement.